Guest Thermostat Guide
Schneider thermostat
BUTTON GUIDE
QUICK START
-
Press Power if the screen is off.
-
Press ▲ to make the room warmer.
-
Press ▼ to make the room cooler.
-
Leave the fan on AUTO for most stays.
-
Press F/C only if you want Fahrenheit or Celsius changed.
Helpful tip: If the display shows SET while you adjust the temperature, this is normal.
HOW TO USE YOUR THERMOSTAT
TEMPERATURE
Use ▲ or ▼ to choose your preferred room temperature. The display may briefly show SET while you are adjusting. This is normal.
FAN SETTING
AUTO is recommended. In AUTO, the fan runs only when the room is heating or cooling. MANUAL Low or High keeps the fan running continuously.
DISPLAY AND UNITS
Press F/C to switch between Fahrenheit and Celsius. The screen shows the selected temperature while you adjust it.
HEATING AND COOLING
The unit automatically detects whether heating or cooling is needed based on the temperature you select.
POWER BUTTON
The unit automatically detects whether heating or cooling is needed based on the temperature you select.
ROOM RESPONSE
After changing the temperature, allow several minutes for the room to begin warming or cooling.
PLEASE ALLOW A FEW MINUTES
After changing the temperature, allow time for the room to adjust.
NEED HELP?
Please contact the Front Desk and we will be happy to assist.